SICK GLL170T-B434 | GLL170 FIBER-OPTIC AMPLIFIER
Features
Supply voltage UB 10 V DC ... 30 V DC 1)
Ripple ≤ 10 % 2)
Current consumption 40 mA 3)
Switching output PNP, NPN, Selectable via menu
Number of switching outputs 1
Switching mode Light/dark switching
Switching mode selector Selectable via menu
Response time ≤ 250 µs, ≤ 50 µs, Selectable via menu 4) 4)
Switching frequency 2 kHz, 10 kHz
Time functions Switch-on delayoff delayone shotWithout time delay
Delay time Programmable, 0 ms ... 9,999 ms
Input Teach-in input
Connection type Male connector M8, 4-pin
Cable material Plastic, PVC
Conductor cross section 0.2 mm²
Cable diameter Ø 3.8 mm
Circuit protection A 5)
B 6)
C 7)
D 8)
Protection class III
Weight 22 g
Housing material Plastic, PC/POM
Tightening torque, max. 0.5 Nm
Enclosure rating IP66 9)
Ambient operating temperature –25 °C ... +55 °C
Ambient temperature, storage –40 °C ... +70 °C
UL File No. NRKH2.E300503 & NRKH8.E300503
1) Limit values.
2) May not fall below or exceed UV tolerances.
3) Without load.
4) Signal transit time with resistive load.
5) A = VS connections reverse-polarity protected.
6) B = inputs and output reverse-polarity protected.
7) C = interference suppression.
8) D = outputs overcurrent and short-circuit protected.
9) With correctly attached fibre-optic cable LL3.
Product Tags:
|
|
SICK GLL170T B434 GLL170 0.5Nm Fiber Optic Amplifier Selectable Via Menu Images
|
